光电倍增管脉冲性能研究

采用外腔式电光开光,调制主动照相探测光源,使光电倍增管处于脉冲工作状态下,以提高光电倍增管的输出幅度和动态范围,改善信号的信噪比,同时避免样品和探测器受长时间强激光照射.对滨松H6780光电倍增管进行了调试,使其线性输出电流由静态的0.1mA提升到脉冲状态的4.4mA,信噪比提高4.5倍.该技术对其他光敏探测有借鉴意义.     

增强型延迟反馈法控制低维混沌系统的解析研究

基于时间延迟反馈控制混沌系统的方法,提出一种增强型控制方案,并利用分析延迟系统产生Hopf分支条件的方法,给出这种方案控制低维连续自治混沌系统时,在达到控制目标的条件下,控制参数的一般解析关系.将这一方案和分析方法应用到两个混沌模型中,结果表明:采用修正的方案可以明显地改善控制混沌的效果和质量;解析分析的结果与实际数值计算的结果一致. 关键词： 延迟反馈 混沌控制 Hopf分支     

Investigation of laminar plasma remelting/cladding processing

Investigation of remelting and cladding processing with laminar plasma jets on several metals has been conducted looking for possible development of a new surface modification technique. The remelting tests illustrated that the new method could evidently improve the material microstructure and properties of cast iron. The cladding was done with Al₂O₃ ceramic powder on stainless steel. The energy dispersive spectra (EDS) analysis was used to determine the distribution of the major cladding element in the plasma-processed layers, for which the microstructure observations and hardness measurements were also performed.     

二维正方各向异性碲圆柱光子晶体完全禁带中缺陷模的FDTD计算分析和设计

用FDTD方法计算了二维正方晶胞各向异性碲圆柱光子晶体的点缺陷模.为了得到TE,TM模式在完全禁带中具有相同共振频率的缺陷模,对中心点缺陷半径Rd以及中心附近对称位置的点缺陷半径Rn做了一系列微调.计算表明,TM模对于Rn的变化不敏感,而TE模随着Rn的改变出现了明显的规则的移动趋势.通过计算分析,发现对应于f=0.4的背景(R=0.3568a),当Rd=0.55a,Rn=0.26a时在完全禁带中TE和TM的缺陷模具有相同的共振频率ω0=0.2466ωe(其中ωe=2πca,a为晶格常数) 关键词： 时域有限差分法 光子晶体 缺陷模 各向异性     

上海市电力需求的协整与误差修正分析

本文采用协整与误差修正模型技术研究了上海市电力需求的决定因素,建立了上海电力需求函数,检验了电力需求与国内生产总值、电力价格、经济结构、电力使用效率之间的长期均衡关系及短期波动关系。     

Growth of NaBi（WO4）2 Dendrite and Mechanism

The solid-liquid interface motion of NaBi（WO4）2 （NBWO） melt crystal growth is observed in an in situ system, in which the whole processes of interface transition from fiat interface and cellular to dendrite are visualized. The spacing of the dendrite under smaller temperature gradient turns out to be larger than that under larger temperature gradient, which is found to be sensitive to the temperature distribution. The mechanism of dendrite growth of NBWO is studied based on the model of the growth units of anion coordination polyhedra. The { 001} face has two apex links, so it shows higher stability and has high growth rate and forms the arm of dendrite, whereas the {010} face has only one apex link, and thus shows relative slower growth rate and firstly forms the branches.     

Einstein relation in chemically doped organic semiconductors

Based on the assumption of Gaussian energy distributions of the lowest unoccupied molecular orbital (LUMO) and the highest occupied molecular orbital (HOMO), analytical expressions of generalized Einstein relation in chemically doped organic semiconductor are developed, by approximation of Coulomb traps with a rectangle potential well. Numerical calculations show that traditional Einstein relations do not hold for chemically doped organic semiconductors. Similar to physical doping, the dependence of diffusion coefficient to mobility D/μ ratio on the carrier concentration has a maximum. An essential difference between chemical doping and physical doping is that, the D/μ ratio in chemically doped organic semiconductors depends not only on carrier concentration and doping concentration, but also on the applied electric field. PACS 71.20.Rv; 72.90.+y; 73.50.-h     

On Polynomial Functions over Finite Commutative Rings

Let R be an arbitrary finite commutative local ring. In this paper, we obtain a necessary and sufficient condition for a function over R to be a polynomial function. Before this paper, necessary and sufficient conditions for a function to be a polynomial function over some special finite commutative local rings were obtained.     

Microstructure of laser melted Al18B4O33w/2024Al composite

The microstructure of a laser treated Al₁₈B₄O₃₃w/2024Al composite has been investigated using transmission electron microscope (TEM), low-angle (glancing angle) X-ray diffraction (XRD) techniques. Various surface microstructures were observed in the laser treated composite. The Al₁₈B₄O₃₃ whisker on the surface of the composite was decomposed during laser surface melting, various decomposition products were studied in the laser treated composite. Eutectic phases and the precipitation in the matrix of the composite with laser-treated were observed. The main phases detected in the molten zone were aluminum and decomposition products Al₂O₃. The effect of laser treatment on the hardness of the composite was also examined. A surface hardness of 400 Hv was noted.